Difference between revisions of "Vendor List"
From DoyleGroup
(→Detectors) |
(→Sensors) |
||
Line 131: | Line 131: | ||
==== Sensors ==== | ==== Sensors ==== | ||
*[http://www.micromagnetics.com/products_mtj_f_s.html Micromagnetics] Magnetoresistance-based B-field sensors | *[http://www.micromagnetics.com/products_mtj_f_s.html Micromagnetics] Magnetoresistance-based B-field sensors | ||
− | *[http://www.honeywell.com/ | + | *[http://www.ssec.honeywell.com/magnetic/products.html Honeywell] Anisotropic magnetoresistance (AMR) magnetic sensors. Noise is < 1 uG/rt-Hz @ 10 Hz. ~20$ each. |
=== Vacuum === | === Vacuum === |
Revision as of 13:32, 28 October 2009
Contents
- 1 Buyers guides
- 2 Ablation target preparation and testing
- 3 Radiation equipment
- 4 Chemicals and materials
- 5 Ceramics
- 6 Metals
- 7 Hardware
- 8 Optics
- 9 Laser Diodes
- 10 Electronics
- 11 Vacuum
- 12 Cryogenics
- 13 Gases and Flow Control
- 14 Quasi-Optical, Microwaves
- 15 mm-wave Microwave Components
- 16 Optical detectors, PMTs
- 17 Coatings, deposition
- 18 Electroplating
- 19 Diamond-Turned Optics
- 20 Heavy Duty Actuators and Motion Control
- 21 Vibration Isolation
- 22 Waterjet
- 23 Computers and Computer Hardware
- 24 Food, etc
Buyers guides
Ablation target preparation and testing
- Applied Test Systems - high-end materials testing and furnaces
- Futek - Load cells and other sensors
- MTI Corporation - relatively inexpensive materials science research supplies (furnaces, temp. controllers, crucibles, gloveboxes, benchtop presses, diamond blade saws, ball mills, nanopowders...); equipment seems generally reliable, but technical support is of little help.
- Renco Corporation - sells glovebox gloves
- Thermo Scientific - general lab supplies, including furnaces
Radiation equipment
- For radiation inspection, non-emergency cleanup, and radiation labels and waste bins, contact Ken Walker at first_last@harvard.edu.
- Atlantic Nuclear - radiation safety: shielding, radiation meters, dosimetry
- Ludlum Measurements - exhaustive assortment of survey meters
- Canberra - radiation measurement and safety supplies, including radioisotope samples
Chemicals and materials
- Alfa aesar - chemical supplier
- American Elements -- pretty much the whole periodic table, but don't get too excited - they don't carry a lot of what they list.
- Plasmaterials
- Process Materials
- Refrac systems - Diffusion bonding, hot-pressing
Ceramics
- Cercom Ceramics
- CoorsTek ceramic tubes etc.
- Kyocera - expensive
- Marketech - will do almost anything, but take ~1 week to send quotes
- Orton Ceramics - supplier for hobby or industrial ceramic making, carries pyrometric cones
- Progressive Technology - ceramic tubes etc.
- Stratamet - will do small custom jobs. Talk to Mark Wesson. Tell him Sarah sent you.
- Zircar Zirconia - refractory ceramics in various forms, mainly alumina and zirconia; also some furnaces
Metals
- ESPI - expensive, but has everything
- Goodfellow
- Rembar- Good for Tantalum, Tungsten etc
- Hagstoz - Gold and precious metals, usually cheap
- Refining Systems - Gold and precious metals
- Hauser and Miller - Even cheaper gold and precious metals
- Allfoils - "UHV Aluminum Foil"
- Sophisticated alloys
- Parker Steel Metric metals (not just steel). Tell Gary Bartlett that Stan sent you.
Hardware
- McMaster
- Copper and brass sales - THE copper and brass supplier
- MSC - When McMaster just won't do
- RAM mounts - Mounts for scopes and other instruments.
- Vlier - Screws with Springs inside and more.
- Air Incorporated - 80/20 supplier. Phone: 800-341-2800. Best to have the cut numbers and location codes (from an 80/20 catalog) ready for any anchor fastener counterboring, etc., before you call.
- Amazing Magnets - Permanent magnets
Optics
Essentials
- Thorlabs
- CVI
- New Focus
- Newport - Excellent damage threshold for price
- Alpine Research Optics - Harmonic separators & other optics w/ great specs and low prices. Speak with Mike Ellison.
- Casix - dirt cheap, long lead times?
- conoptics - Isolators
- Edmund optics
- Optosigma - windows
- Esco Products-unusually fast and inexpensive for custom optics jobs, proven reliable. Also good selection of stock optics, especially cheap windows, lenses, etc
Specialty
- Research Electro Optics - High end optics
- Advanced Thin Films - custom jobs
- EO tech - Isolators
- PI action - CCD cameras
- Semrock - Filters + MaxMirror
- Intor - cheap interference filters
- Uniblitz - shutters
- Andover - colored glass filters
- Omega - stock + custom interference filters
- Coherent - Tell them you want the 'Family Discount' & Get 20% Off all laser measurement products. For problems contact service manager: rose.medina@coherent.com (408) 764-4426
- OFR - fiber optics and isolators
- Technical Glass
- Rubicon - Sapphire
- NEOS - AOMs
- Intraaction - AOMs
- St. Gobain Crystals - custom crystalline optics
- Standa - mostly optomechanics
- Expla - laser systems, OPOs, some components
- Optometrics - diffraction gratings
- Argyle Optics - custom stuff might be cheap but standard optics are also custom made = expensive
- Vere Optics lab accessories
- Tempotec- Chinese Company...like Casix or casix affiliate?
- Mightex - CCD cameras
- Siskiyou - Unusual optomechanics: top-drive flexures & stages, etc.
- Optical fiber fault checker
- Laser Components - Both custom and stocked cavity mirrors
- Photonic Cleaning Optics cleaning supplies for astronomy, including 'First Contact' goop.
- Nihon Tokushu Kogaku Jushi Fresnel lenses up to f/0.2
- Fresnel Tech Custom and specialty Fresnel lenses
- Custom Scientific Flats, windows, fibers and coatings. They made the EDM field plates: 18" x 8", < 5 lambda flat with conducting & AR coatings.
Laser Diodes
- Sacher
- Eagleyard - AR coated laser diodes
- Roither Lasertechnik - Laser diodes, LEDs, Optics,
- Toptica - Lasers, AR Coated Diodes
- Intelite/Meshtel - Non-AR Coated Diodes, Sacher gets some of their diodes here before AR Coating
- Power Technology - Single Mode Diodes, TAs, DFBs and more
- m2K - Tapered Amplifiers and More
- FLT Laser - Huge selection including DFBs from many suppliers in addition to their own line
- Nanoplus - DFBs
- RPMCLasers - Single Mode diodes and more, not AR
- Intenseco - I think only Multimode / Broad Area
- qPhotonics - Single Mode Laser diodes and more. 895-915 nm and 1050-1080 nm diodes are offered with AR coating (for $300-400)
- Opnext - Make a lot of Non-AR coated diodes
- Axcel Photonics - Common NIR Laser Diodes
- Lab351 - Russian Laser Diode Company
Electronics
- Mouser Electronics
- Digikey
- Analog Devices
- Apex Microtechnologies - High Voltage/Power Op-Amps
- Lansing Instruments - Really Nice Enclosures
- Emco High Voltage - DC-DC Converters
- Allied Electronics
- L-Com - Cheap connectors/adaptors
- Powell Electronics - Hard to find/out of stock stuff
- Meritronics - Board Assembly
- Pasternack - Quality BNC cables
Sensors
- Micromagnetics Magnetoresistance-based B-field sensors
- Honeywell Anisotropic magnetoresistance (AMR) magnetic sensors. Noise is < 1 uG/rt-Hz @ 10 Hz. ~20$ each.
Vacuum
Essentials
- LDS Vacuum Shopper - fast + cheap
- Duniway stockroom Cheap, good selection of used vacuum equipment
- Huntington
- Kurt J. Lesker
- MDC
- A & N Corp - Feedthroughs, flanges etc.
Specialty
- AVS Technical Resources - Useful calculator for conversion factors, pump/gauge ranges
- Varian
- Precision Cryo Ask for Dick Gummer. They made the EDM beam source chamber.
- Kimball physics - special (cool) chambers
- Sharon - custom chambers
- Key High
- vacuum generators Best quality UHV all-metal valves.
- Insulator Seal - Feedthroughs
- Apiezon Greases and Waxes
- EVAC Vacuum - Unique! Standard QF/ISO hardware, but made out of glass(!), aluminum, etc.
- accuglass products - Unusually nice selection of feedthroughs, in-vacuum electrical connectors, hardware, etc. Prices better than Lesker.
- MPF Products - Similar to accuglass for electrical feedthroughs, but also has nice selection of viewports
- Atlas UHV - UHV grade welded aluminum vacuum chambers. Made the EDM interaction chamber.
Cryogenics
- Cryodepot
- Cryofab
- Janis
- Lakeshore Cryotronics
- Oxford Instruments
- Cryomech
- Calgon Carbon - Activated charcoal for Sorbs
- discountcryo
Gases and Flow Control
- MKS Instruments - Flow controllers.
- Laminar Technologies - Sells used MKS flow controllers. The Harvard cleanroom manager (Noah Clay) claims that used flow controllers are better (since they are screened for infant death), and of course they are cheaper.
Quasi-Optical, Microwaves
mm-wave Microwave Components
- Quinstar - Large selection of waveguide and coax, ask for Sage Kuno
- Miteq - Largest supplier (and stock) but more expensive
Optical detectors, PMTs
- Electron Tubes
- Burle
- Hamamatsu
- RoentDek - Makes MCPs and readout electronics
- DelMar Photonics - MCP
- Beam Imaging - MCP directly coupled to a camera through a fiberoptic rod.
- Primer on MCPs
Coatings, deposition
- AIMCAL - Assoc. of Metallizers, Coaters & Laminators FAQ
- Spectrum coatings>
- Helia Photonics - Ion-assisted deposition
- Ionedge - Ion-assisted deposition
- Thin Films Inc. - Sputtering, Evaporation, Lithography - flexible small shop
- Thin Film Labs - specialize in optical component coatings
- Koral Labs - thin film deposition + vacuum furnace stuff
- IJ Research - ceramics, deposition, lithography - flexible, associated with USCB, IIRC
- Sophisticated alloys
- Process Materials
- Sputtering target suppliers
- Sputtering Materials Inc
Electroplating
- Paramount Metal Finishing - Rack Electroplating - reasonable prices
- AMZ Manufacturing - High quality electroplating
- Metal Finishing Technologies - Various plating services
- Epner Technology - Fancy gold electroplating - expensive, high-tech
Diamond-Turned Optics
- II-VI Infrared - good CO2 optics; possibly worst url ever
- Corning NetOptix - used to be OFC Diamond Turning
- Kugler - German precision optics company, ja
- Kaleido Technology - in Denmark
Heavy Duty Actuators and Motion Control
- Newmark Systems
- Arrick Robotics
- Parker Hannfin Motion Control
- Cyber Research Motion Control
- Techno Linear Motion Systems
- Velmex Low cost, large travel motorized stages
- Aerotech Precision stages
Vibration Isolation
- EAR Specialty Composites ==> Jan's smelly Blue Stuff = #6309-0026
Waterjet
- Barton Mines Garnet abrasive for the waterjet. Details here.
- OMAX Waterjets, and supplies. Details here
Computers and Computer Hardware
- Dell Configure computer on Dell's website, print the configuration as a PDF, make a PO, and email the PO and the configuration to Andy Meyer: first_last@dell.com
- Lenovo Direct Select "Personal" under Lenovo, configure a computer, print the configuration as a PDF, make a PO, and mail to Aaron Zabel: flast@lenovo.com
- NewEgg Computer accessories. WARNING: they do not accept POs.