Difference between revisions of "Vendor List"

From DoyleGroup
Jump to: navigation, search
(→‎Buyers guides)
Line 94: Line 94:
  
 
=== Ceramics ===
 
=== Ceramics ===
−
*[http://www.stratamet.com Stratamet] - will do small custom jobs.  Talk to Mark Wesson.  Tell him Sarah sent you.
 
 
*[http://www.coorstek.com CoorsTek] ceramic tubes etc.
 
*[http://www.coorstek.com CoorsTek] ceramic tubes etc.
 
*[http://global.kyocera.com/prdct/fc/index.html Kyocera] - expensive
 
*[http://global.kyocera.com/prdct/fc/index.html Kyocera] - expensive
 
*[http://www.mkt-intl.com/ Marketech] - will do almost anything, but take ~1 week to send quotes
 
*[http://www.mkt-intl.com/ Marketech] - will do almost anything, but take ~1 week to send quotes
 +
*[http://www.mtixtl.com/ MTI Corporation] - relatively inexpensive materials science research supplies (furnaces, temp. controllers, crucibles, benchtop presses, diamond blade saws, ball mills, nanopowders...).  Equipment seems generally reliable, but technical support is usually of little help.
 
*[http://www.prgtech.com/ Progressive Technology] - ceramic tubes etc.
 
*[http://www.prgtech.com/ Progressive Technology] - ceramic tubes etc.
 +
*[http://www.stratamet.com Stratamet] - will do small custom jobs.  Talk to Mark Wesson.  Tell him Sarah sent you.
 +
*[http://www.zircarzirconia.com/ Zircar Zirconia} - refractory ceramics in various forms, mainly alumina and zirconia; also some furnaces
  
 
=== Vacuum ===
 
=== Vacuum ===

Revision as of 15:06, 10 August 2009

Buyers guides

Ablation targets, pressing, materials

Hardware

  • McMaster
  • Copper and brass sales - THE copper and brass supplier
  • MSC - When McMaster just won't do
  • RAM mounts - Mounts for scopes and other instruments.
  • Vlier - Screws with Springs inside and more.
  • Air Incorporated - 80/20 supplier. Phone: 800-341-2800. Best to have the cut numbers and location codes (from an 80/20 catalog) ready for any anchor fastener counterboring, etc., before you call.
  • Amazing Magnets - Permanent magnets

Optics

Laser Diodes

  • Sacher
  • Eagleyard - AR coated laser diodes
  • Roither Lasertechnik - Laser diodes, LEDs, Optics,
  • Toptica - Lasers, AR Coated Diodes
  • Intelite/Meshtel - Non-AR Coated Diodes, Sacher gets some of their diodes here before AR Coating
  • Power Technology - Single Mode Diodes, TAs, DFBs and more
  • m2K - Tapered Amplifiers and More
  • FLT Laser - Huge selection including DFBs from many suppliers in addition to their own line
  • Nanoplus - DFBs
  • RPMCLasers - Single Mode diodes and more, not AR
  • Intenseco - I think only Multimode / Broad Area
  • qPhotonics - Single Mode Laser diodes and more. 895-915 nm and 1050-1080 nm diodes are offered with AR coating (for $300-400)
  • Opnext - Make a lot of Non-AR coated diodes
  • Axcel Photonics - Common NIR Laser Diodes
  • Lab351 - Russian Laser Diode Company

Electronics

Ceramics

  • CoorsTek ceramic tubes etc.
  • Kyocera - expensive
  • Marketech - will do almost anything, but take ~1 week to send quotes
  • MTI Corporation - relatively inexpensive materials science research supplies (furnaces, temp. controllers, crucibles, benchtop presses, diamond blade saws, ball mills, nanopowders...). Equipment seems generally reliable, but technical support is usually of little help.
  • Progressive Technology - ceramic tubes etc.
  • Stratamet - will do small custom jobs. Talk to Mark Wesson. Tell him Sarah sent you.
  • [http://www.zircarzirconia.com/ Zircar Zirconia} - refractory ceramics in various forms, mainly alumina and zirconia; also some furnaces

Vacuum

Cryogenics

Quasi-Optical, Microwaves

mm-wave Microwave Components

  • Quinstar - Large selection of waveguide and coax, ask for Sage Kuno
  • Miteq - Largest supplier (and stock) but more expensive

Detectors, PMTs

Metals

Coatings, deposition

Electroplating

Diamond-Turned Optics

Heavy Duty Actuators and Motion Control

Vibration Isolation

Waterjet

Retrieved from "http://doylegroup.harvard.edu/wiki/index.php?title=Vendor_List&oldid=440"